跳转到主内容
英语
中文

正翻译步骤 6

步骤 6
Who runs the phone? Battery! Removing the battery from the S6 should be a little bit easier than from the Edge. In the Edge, the battery cable was routed under the motherboard before connecting on top, necessitating removing the motherboard to get to the battery. Looks like with the bit of extra room inside the regular S6, Samsung was able to run the cable on top of the board, to save a step for battery removal.
  • Who runs the phone? Battery!

  • Removing the battery from the S6 should be a little bit easier than from the Edge. In the Edge, the battery cable was routed under the motherboard before connecting on top, necessitating removing the motherboard to get to the battery.

  • Looks like with the bit of extra room inside the regular S6, Samsung was able to run the cable on top of the board, to save a step for battery removal.

  • Also, thanks to the flat-screen design of the S6, it's easier to push an opening pick straight into the gap between the battery and display assembly, making it easier to cut the (just-as-strong) adhesive holding the battery.

  • This hardly qualifies as a user-replaceable battery, but it is a bit easier than in the S6 Edge. Still, it's a flying leap backwards from previous Galaxies like the S5, where you could replace the battery using nothing but your wits, and you didn't even really need those.

是什么支持手机的运行?是电池!

从S6上卸下电池比Edge的更容易。Edge的电池连接线穿过主板的下面然后连接到顶部。所以要先卸下主板然后才能卸下电池。

S6内部看起来有一点额外的空间,以至于使连接线直接插在板子上,省去拆卸电池的一步。

同时,拜S6平板设计所赐,很容易就能将塑料撬片插入到电池和显示组件之间的缝隙中,从而去掉固定电池的粘合胶。

用户自行很难更换电池,但是相比之下S6 更容易一点。当然不同于先前的S5,若要换电池就要用到聪明才智啦。

在开源创作共享许可协议下,你的投稿已被许可