跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 2

步骤 2
Using Phillips #00 screwdriver, remove 3.0 mm screws on the bottom of the camera closer to the back. Using Phillips #00 screwdriver remove  two 3.0 mm screws on the back of the camera. This will remove the eyelet for the camera strap and the rear cover. Using Phillips #00 screwdriver remove  two 3.0 mm screws on the back of the camera. This will remove the eyelet for the camera strap and the rear cover.
  • Using Phillips #00 screwdriver, remove 3.0 mm screws on the bottom of the camera closer to the back.

  • Using Phillips #00 screwdriver remove two 3.0 mm screws on the back of the camera. This will remove the eyelet for the camera strap and the rear cover.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可