Skip to main content

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 6

Step 6
Using Phillips #00 screwdriver, remove seven 3.0 mm screws. Remove the remaining five 3.0 mm screws which hold the rear case and the control panel together. The rear panel is now free from the camera.
  • Using Phillips #00 screwdriver, remove seven 3.0 mm screws.

  • Remove the remaining five 3.0 mm screws which hold the rear case and the control panel together.

  • The rear panel is now free from the camera.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可