跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 2

步骤 2
Pull the metal bar out through the right side of the eject lever. Make sure to keep track of the spring located on the left side of the lever as it may shoot off when removing the metal bar. When reassembling, the procedure becomes more difficult due to the spring (marked red). We recommend that one person hold the spring in place (picture 3) while another person slides the metal bar back into the left housing, and slide the eject lever onto the metal bar.
  • Pull the metal bar out through the right side of the eject lever.

  • Make sure to keep track of the spring located on the left side of the lever as it may shoot off when removing the metal bar.

  • When reassembling, the procedure becomes more difficult due to the spring (marked red). We recommend that one person hold the spring in place (picture 3) while another person slides the metal bar back into the left housing, and slide the eject lever onto the metal bar.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可