翻译步骤＃11 - Canon PowerShot SD200 LCD Screen Replacement - iFixit

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的3本指南。

英语

中文

上一步下一步

正翻译步骤 11

步骤 11

Locate the two ZIF connectors on the front of the camera.

Use the flat end of the spudger to flip up the tab on the blue ZIF connector. Then pull the ribbon cable straight out.

Use the flat end of the spudger to flip up the tab on the black ZIF connector. Then pull the ribbon cable straight out.

Locate the two ZIF connectors on the front of the camera.
Use the flat end of the spudger to flip up the tab on the blue ZIF connector. Then pull the ribbon cable straight out.
Use the flat end of the spudger to flip up the tab on the black ZIF connector. Then pull the ribbon cable straight out.

在开源创作共享许可协议下，你的投稿已被许可。