跳转到主内容

注:你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南

英语
中文

正翻译步骤 2

步骤 2
Use the flat end of a spudger to lift the rear-facing camera connector up off of its socket on the logic board. Pry only on the connector, not the socket itself or you risk damaging the logic board.
  • Use the flat end of a spudger to lift the rear-facing camera connector up off of its socket on the logic board.

  • Pry only on the connector, not the socket itself or you risk damaging the logic board.

用平口撬棒挑开扣在主板上的后置摄像头排线。

仅挑开排线即可,不要撬到主板否则会损坏主板。

在开源创作共享许可协议下,你的投稿已被许可