跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 1

步骤 1
First,  put the laptop on a flat surface and make sure the battery side is up. Remove the battery to prevent any electrical damage to any of the components. Remove the following screws:
  • First, put the laptop on a flat surface and make sure the battery side is up.

  • Remove the battery to prevent any electrical damage to any of the components.

  • Remove the following screws:

  • There are five(5) 5.8 mm Phillips screws located in the battery compartment, where the battery formerly resided.

  • There are fifteen(15) 7.2 mm Phillips screws that secure the lower case to the upper case of the laptop.

  • These screw locations and sizes apply for the part number RG274UA#ABA.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可