跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 1

步骤 1
After removing the AV circuit board you are left with the front casing attached to the inner casing and flash unit.
  • After removing the AV circuit board you are left with the front casing attached to the inner casing and flash unit.

  • First you must remove two 3.5mm blue screws near the hole of the lens that attach the inner casing.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可