跳转到主内容
英语
中文

正翻译步骤 3

步骤 3
Now we will pry the back housing from the phone. I started at the top left corner and worked my way around to the right top corner. Don't worry about prying at the very top.
  • Now we will pry the back housing from the phone.

  • I started at the top left corner and worked my way around to the right top corner.

  • Don't worry about prying at the very top.

  • You can use a pry tool like the one in the photo or a guitar pick works great as well.

  • Don't pry to hard or to deep or you may damage the frame or possibly tear a ribbon cable (which is never a good thing).

  • Now that there is some seperation start at the bottom and lift with your fingers to pop the back housing off the phone.

  • It should pop off easily, but if not, don't force it and try running your pry tool along the edges again.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可