跳转到主内容
英语
中文

正翻译步骤 3

步骤 3
Use a spudger to lift the LCD ribbon cable locking bar by angling it up, then withdraw the ribbon. Take care not to break it. Use the plastic opening tool at the bottom right hand side of the button board to lift it up and out.
  • Use a spudger to lift the LCD ribbon cable locking bar by angling it up, then withdraw the ribbon.

  • Take care not to break it.

  • Use the plastic opening tool at the bottom right hand side of the button board to lift it up and out.

  • The buttons board comes out with a "click" as it snaps out of a connector below.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可