跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 1

步骤 1
Using your fingers, remove the green tape holding the three ribbon cables down. Using the flat end of the heavy-duty spudger, carefully lift the black tab that holds the leftmost,  black ribbon cable in place. Repeat this step for the gold ribbon cable and the black ribbon cable. Using your fingers, gently slide each of the three cables straight out of the connectors.
  • Using your fingers, remove the green tape holding the three ribbon cables down.

  • Using the flat end of the heavy-duty spudger, carefully lift the black tab that holds the leftmost, black ribbon cable in place. Repeat this step for the gold ribbon cable and the black ribbon cable.

  • Using your fingers, gently slide each of the three cables straight out of the connectors.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可