跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 5

步骤 5
Be sure to insert the spudger underneath the charger port and not inside the charger port to avoid damaging the component Slide the flat end of the heavy-duty spudger under the charger port. Make sure the spudger is all the way to the back of the cavity and slide horizontally across the bottom to break the adhesive.
  • Be sure to insert the spudger underneath the charger port and not inside the charger port to avoid damaging the component

  • Slide the flat end of the heavy-duty spudger under the charger port.

  • Make sure the spudger is all the way to the back of the cavity and slide horizontally across the bottom to break the adhesive.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可