修复你的物品

维修的权力

商店

返回指南
英语
中文
上一步 下一步

正翻译步骤 3

步骤 3
Turn off the ignition on the vehicle and proceed with the following steps. There are two screws holding the adapter in place. Using a Phillips head screwdriver, remove both screws in order to remove and gain access to the adapter. The two screws are identical. Be careful not to lose them.

  • Turn off the ignition on the vehicle and proceed with the following steps.

  • There are two screws holding the adapter in place. Using a Phillips head screwdriver, remove both screws in order to remove and gain access to the adapter.

  • The two screws are identical. Be careful not to lose them.

  • Be sure the car is completely off before unscrewing anything.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下，你的投稿已被许可。