跳转到主内容
英语
中文

正翻译步骤 7

步骤 7
Set the  torque wrench to 32 ft-lbs. Check if all of the oil has drained from the engine by seeing if the oil is still flowing into the drain pan. Wipe any spills on the ground.
  • Set the torque wrench to 32 ft-lbs.

  • Check if all of the oil has drained from the engine by seeing if the oil is still flowing into the drain pan.

  • Wipe any spills on the ground.

  • Replace the drain plug.

  • Use the 14mm socket torque wrench to tighten the drain plug until the wrench makes a "clicking" noise.

  • Do not over tighten the drain plug with the torque wrench. Too much force could cause the head of the bolt to snap off and become stuck in the engine.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可