跳转到主内容

注:你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南

英语
中文

正翻译步骤 2

步骤 2
Insert the tip of an unrolled paper clip into the small hole located on the side of the optical drive.
  • Insert the tip of an unrolled paper clip into the small hole located on the side of the optical drive.

  • The tray will partially pop out of the laptop.

  • Firmly pull the drive straight away from the laptop.

  • While pulling the drive out, be careful not to bend the sliding rails on both sides of the optical drive.

  • At this point you can remove the entire optical drive, or you can continue to disassemble the optical drive assembly.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可