跳转到主内容
英语
中文

正翻译步骤 11

Step 11
Once dry, confirm that the resin has fully hardened. Use the sand paper to sand the resin surface and existing surface to create a seamless finish. Once again, start with the rough sand paper and then finish sanding with the fine.
  • Once dry, confirm that the resin has fully hardened.

  • Use the sand paper to sand the resin surface and existing surface to create a seamless finish.

  • Once again, start with the rough sand paper and then finish sanding with the fine.

  • After sanding, the fiber glass should be flush with the existing surface of the body. At this point feel free to paint over the hole and get back on the lake.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可