Skip to main content
英语
中文

正翻译步骤 10

Step 10
After you have again mixed your resin, begin by applying a small layer to the inside of the hole only. Place your fiberglass piece onto the resin in the hole, and then continue to coat the layer in resin until soaked. Continue this process with all layers until resin surface is flush with existing surface.
  • After you have again mixed your resin, begin by applying a small layer to the inside of the hole only.

  • Place your fiberglass piece onto the resin in the hole, and then continue to coat the layer in resin until soaked.

  • Continue this process with all layers until resin surface is flush with existing surface.

  • Again, let the resin dry for the designated period of time provided on the back of the resin container.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可