跳转到主内容
英语
中文

正翻译步骤 6

步骤 6
With the throw away paint brush begin to apply the resin to the back side of the hole directly on the cleaned surface. After the resin is on, take one of the fiberglass pieces you cut out earlier and place it over the hole onto the resin. Continuing with the brush, apply more resin onto the fiberglass until it is entirely soaked.
  • With the throw away paint brush begin to apply the resin to the back side of the hole directly on the cleaned surface.

  • After the resin is on, take one of the fiberglass pieces you cut out earlier and place it over the hole onto the resin.

  • Continuing with the brush, apply more resin onto the fiberglass until it is entirely soaked.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可