跳转到主内容
英语
中文

正翻译步骤 2

步骤 2
Two screws hold the power connector in place. Remove these before trying to remove anything else.
Inside the Tablet
  • Two screws hold the power connector in place. Remove these before trying to remove anything else.

  • Four screws and one cable will remove the speaker assembly.

  • Three screws and a pop on connector secure the micro-SD reader.

  • There are several screws that hold the battery tray in place. The battery is held in with fairly strong adhesive, so I didn't try to take it out of the tray.

  • Three cables are attached to the touch board. I didn't try to remove this board from the frame.

  • Disconnect the four cable connectors that lay across the battery. The cables with blue tabs do not have a locking mechanism holding the cable in place.

  • There are two magnets located at the bottom center. More than likely used for a case cover or for a feature not included on this tablet.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可