跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 4

步骤 4
Use your fingernail or the edge of a plastic opening tool to flip up the retaining flap on LED indicator ZIF connector. Be sure you are prying up on the hinged retaining flap, not the socket itself.
  • Use your fingernail or the edge of a plastic opening tool to flip up the retaining flap on LED indicator ZIF connector.

  • Be sure you are prying up on the hinged retaining flap, not the socket itself.

  • After flipping up the locking tab on the socket, use your fingers or a pair of tweezers to gently pull the cable straight out of its socket.

  • If necessary, transfer the power board ribbon cable to your new power board.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可