菜单

你的设置

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的19指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 3

步骤 3
Insert the spudger in between the lower casing and lower panel near the top right corner of the DSi. Carefully run the spudger along the edge of the outer casing, creating an opening between the body and the casing. Continue running the spudger around the body of the DSi until the majority of the lower case has been separated.

  • Insert the spudger in between the lower casing and lower panel near the top right corner of the DSi.

  • Carefully run the spudger along the edge of the outer casing, creating an opening between the body and the casing.

  • Continue running the spudger around the body of the DSi until the majority of the lower case has been separated.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下，你的投稿已被许可。