跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
中文

正翻译步骤 5

步骤 5
Use the flat end of a spudger or your fingernail to carefully flip up both retaining flaps one each of the ZIF sockets. When disconnecting the ZIF sockets flip them outwards to the edge of the board/towards the cables respectively.
  • Use the flat end of a spudger or your fingernail to carefully flip up both retaining flaps one each of the ZIF sockets.

  • When disconnecting the ZIF sockets flip them outwards to the edge of the board/towards the cables respectively.

  • Be careful not to damage the pin connector. Pull parallel to the device, not up.

  • For more info on how to disconnect ZIF connectors, check out the Recognizing & Disconnecting Cable Connectors guide.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可