跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

正翻译步骤 11

步骤 11
没有图片
  • I used a polyester swab to clean the LCD and the frame of any dust and debris before placing the new digitizer. I also used small dabs of silicone adhesive on all four corners of the new digitizer where it sits in the frame. This should ensure that it will not come loose during daily use but will let me still change it again if I have to. The whole procedure is relatively straight forward. Just take your time and watch the ribbon cable retainer. I found those to be the trickiest part.Good luck

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可