跳转到主内容

注:你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南

英语
中文

正翻译步骤 7

步骤 7
Insert the tip of a small flathead screwdriver between the post and the outer edge of one arm of the X-clamp. Gently rotate the screwdriver, lifting the arm of the X-clamp up and off of the post.
  • Insert the tip of a small flathead screwdriver between the post and the outer edge of one arm of the X-clamp.

  • Gently rotate the screwdriver, lifting the arm of the X-clamp up and off of the post.

在X固定夹具的一个角上插入一个小的平头螺丝刀。

轻轻地提起螺丝刀,将X夹具的一个金属臂提起。

在开源创作共享许可协议下,你的投稿已被许可