跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的6本指南

英语
中文

正翻译步骤 2

步骤 2
Remove the two 9.5 mm T9 Torx screws from the WI-Fi board. Lift the Wi-Fi board straight up from its socket in the upper metal case. Leaving the Wi-Fi board antenna cable in place, move the Wi-Fi board aside, exposing the screw labeled "C3" that was beneath it.
  • Remove the two 9.5 mm T9 Torx screws from the WI-Fi board.

  • Lift the Wi-Fi board straight up from its socket in the upper metal case.

  • Leaving the Wi-Fi board antenna cable in place, move the Wi-Fi board aside, exposing the screw labeled "C3" that was beneath it.

将固定WiFi模块的两颗9.5 mm T9 Torx螺丝移除。

垂直将WiFi模块从金属壳顶部的插座中提起。

将WiFi天线模块放置一边。使得下方的标有C3的螺丝暴露出来。

在开源创作共享许可协议下,你的投稿已被许可