跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南

英语
意大利语

正翻译步骤 9

步骤 9
The front button cable has a unique ZIF connector—pay attention to the next few steps to safely disconnect it. Use tweezers to lift the plastic retaining loop over the connector on the board. Use the tip of a spudger to push the connector's locking tab toward the cable to unlatch it.
  • The front button cable has a unique ZIF connector—pay attention to the next few steps to safely disconnect it.

  • Use tweezers to lift the plastic retaining loop over the connector on the board.

  • Use the tip of a spudger to push the connector's locking tab toward the cable to unlatch it.

Il cavo del pulsante frontale ha un connettore ZIF esclusivo - fai attenzione ai prossimi passaggi per scollegarlo correttamente.

Usa una pinzetta per sollevare la copertura di plastica sopra il connettore sulla scheda.

Usa la punta di uno spudger per premere il meccanismo di chiusura del connettore verso il cavo per sbloccarlo.

在开源创作共享许可协议下,你的投稿已被许可