跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南

英语
日语

正翻译步骤 2

步骤 2
Using the spudger tool, carefully remove the bottom of the battery from it's location below the logic boards.
  • Using the spudger tool, carefully remove the bottom of the battery from it's location below the logic boards.

  • The battery is attached to the motherboard with some adhesive, so you may need an iOpener to loosen up the adhesive. Check out the iOpener guide for info on how to do it.

  • Do not pull the battery from the tablet yet, as it is still connected to the motherboard.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可