修复你的物品 社区 商店

修复死亡黄灯

返回指南
英语
中文
上一步 下一步

正翻译步骤 8

步骤 8
Yellow Light of Death Repair: 步骤 0 中的图像 1，3 Yellow Light of Death Repair: 步骤 0 中的图像 2，3 Yellow Light of Death Repair: 步骤 0 中的图像 3，3

  • Apply the fresh thermal pads to the motherboard in the locations indicated:

  • Large square pads

  • Small square pads

  • Small Rectangular Pads

  • If you'd like to cut your own thermal pads, you'll need material about 2-2.5mm in thickness. Thanks to user howardsarah34 for the exact measurements for the thermal pads.

  • Two 3cm x 3cm Squares

  • Ten 1cm x 1cm Squares

  • Five 1.5cm x 0.5cm rectangles

在所示位置将新的散热垫贴到主板上：

大方形垫

小方块

小矩形垫

如果你想要自行裁剪散热垫，你将需要约2-2.5mm厚度的材料。 感谢用户howardsarah34对的散热垫的精确测量。

两个3厘米x 3厘米的正方形

十个1厘米x 1厘米的正方形

五个1.5厘米x 0.5厘米的矩形

[* black] Apply the fresh thermal pads to the motherboard in the locations indicated:
[* red] Large square pads
[* orange] Small square pads
[* yellow] Small Rectangular Pads
-[* icon_note] If you'd like to cut your own thermal you'll need material about 2-2.5mm in thickness. Thanks to user [https://www.ifixit.com/User/1366461/howardsarah34|howardsarah34] for the exact measurements for the thermal pads.
+[* icon_note] If you'd like to cut your own thermal pads, you'll need material about 2-2.5mm in thickness. Thanks to user [https://www.ifixit.com/User/1366461/howardsarah34|howardsarah34] for the exact measurements for the thermal pads.
[* red] Two 3cm x 3cm Squares
[* orange] Ten 1cm x 1cm Squares
[* yellow] Five 1.5cm x 0.5cm rectangles

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。