跳转到主内容
英语
中文

正翻译步骤 5

步骤 5
Using pair of channel locks or large pliers, pinch together and pull back the hose clamp securing the hose to the coolant intake. If the factory hose clamps have been replaced, you may need a screwdriver to remove the replacement hose clamps.
  • Using pair of channel locks or large pliers, pinch together and pull back the hose clamp securing the hose to the coolant intake.

  • If the factory hose clamps have been replaced, you may need a screwdriver to remove the replacement hose clamps.

  • There is probably still coolant in the tube so try not to spill it everywhere when removing the hose.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可