跳转到主内容
英语
中文

正翻译步骤 1

步骤 1
Use the edge of an iPod opening tool to begin peeling the loop of copper tape wrapped around the connector near the center of the top edge of the logic board. Continue peeling the tape until it is free from the logic board. Using a pair of tweezers to peel the tape greatly simplifies the task if you've got them.
  • Use the edge of an iPod opening tool to begin peeling the loop of copper tape wrapped around the connector near the center of the top edge of the logic board.

  • Continue peeling the tape until it is free from the logic board.

  • Using a pair of tweezers to peel the tape greatly simplifies the task if you've got them.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可