跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南

英语
中文

正翻译步骤 3

步骤 3
Use an iPod opening tool to slightly lift the edge of the logic board next to the battery enough to grab it with your other hand. Do not excessively bend the logic board, as it is very thin and fragile.
  • Use an iPod opening tool to slightly lift the edge of the logic board next to the battery enough to grab it with your other hand.

  • Do not excessively bend the logic board, as it is very thin and fragile.

  • Be very careful not to lift too much as the volume control ribbon cable is still connected and will tear very easily.

  • While gently lifting the logic board with one hand, use an iPod opening tool to lift the logic board near the copper tape at the logic board's top edge.

  • The logic board will be lifted adequately when the last display assembly connector has cleared the top edge of the rear case.

使用撬棒轻轻抬起电池旁边的主板边缘,以便用另一只手抓住电池。

不要过力弯曲主板,因为它非常薄且脆弱。

音量控制键带状电缆仍然连接时,请小心不要抬起太多,否则很容易撕裂。

在用一只手轻轻提起主板的同时,使用撬棒在主板板的顶部边缘提上位于连接带附近的主板。

当最后一个显示屏组件连接器从后壳顶部边缘摘除时,主板可以提起。

在开源创作共享许可协议下,你的投稿已被许可