翻译步骤＃41 - iPad Mini 2 LTE Logic Board Replacement - iFixit

修复你的物品

维修的权力

商店

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。

英语

西班牙语

上一步下一步

正翻译步骤 41

步骤 41

The Lightning connector cable is stuck to the case with some adhesive. To detach the adhesive you will be sliding an opening pick between the cable and the case. Be very careful not to cut the Lightning connector cable itself.

Carefully insert an opening pick under the ribbon cable near the Lighting connector housing.

The Lightning connector cable is stuck to the case with some adhesive. To detach the adhesive you will be sliding an opening pick between the cable and the case. Be very careful not to cut the Lightning connector cable itself.
Carefully insert an opening pick under the ribbon cable near the Lighting connector housing.
Slide the opening pick toward the logic board, but stop half an inch from the bend in the cable.
Continuing farther along the ribbon cable risks cutting it.

在开源创作共享许可协议下，你的投稿已被许可。