跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 3

步骤 3
With the flat end of a spudger, lift the front-facing camera connector straight up off of its socket on the logic board. Be sure to only pry on the connector, not the socket itself.
  • With the flat end of a spudger, lift the front-facing camera connector straight up off of its socket on the logic board.

  • Be sure to only pry on the connector, not the socket itself.

  • Gently fold the front-facing camera cable towards the camera, moving it out of the way of the cable under it.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可