跳转到主内容

iPad Mini 3 Wi-Fi 液晶显示板更换

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的48本指南

英语
中文

正翻译步骤 22

步骤 22
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 步骤 0 中的图像 1,3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 步骤 0 中的图像 2,3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 步骤 0 中的图像 3,3
  • Insert the tip of one last pick next to the previous step's pick, and slide it beneath the home button.

  • Stop about an inch from the right-hand side to avoid cutting the digitizer cable.

  • Insert the pick slightly deeper and work it back toward the home button.

  • Again, be sure to only slide the pick toward the center of the iPad when it is fully inserted; otherwise you may damage the antenna beneath the glass.

拿一片新的撬片来从刚才那片撬片右边Home键下方继续滑动。

在距离右侧边缘约一英寸的位置前停下,以避免切割到排线。

将撬片深入,再往回滑动至Home键处。

再次,请确保只有当撬片完全插入iPad时,才能向iPad的中心滑动; 否则可能会损坏玻璃面板下方的天线。

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利