跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南

英语
中文

正翻译步骤 2

步骤 2
Insert a plastic opening tool between the midframe and the display assembly. Work the plastic opening tool around the perimeter of the phone to break the adhesive. This adhesive is relatively weak, so no heat gun should be necessary.
  • Insert a plastic opening tool between the midframe and the display assembly.

  • Work the plastic opening tool around the perimeter of the phone to break the adhesive.

  • This adhesive is relatively weak, so no heat gun should be necessary.

  • Be careful to not separate the front glass panel from the rest of the display assembly, as it is still held together with adhesive.

在中框和显示屏模组中插入塑料打开工具。

在手机四周滑动来分离粘合剂。

这种粘合剂相对较弱,所以不需要热风枪。

小心不要将前玻璃面板与显示组件的其余部分分开,因为它仍然与粘合剂一起保持在一起。

在开源创作共享许可协议下,你的投稿已被许可