跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南

英语
中文

正翻译步骤 1

步骤 1
The iPod Touch 4th Generation front panel is attached to the rear case by adhesive. The use of a heat gun to soften the adhesive is highly recommended.
  • The iPod Touch 4th Generation front panel is attached to the rear case by adhesive. The use of a heat gun to soften the adhesive is highly recommended.

  • With the heat gun set on "low", begin heating the lower portion of the Touch near the home button.

  • It is suggested to heat the desired portion in a circular motion pattern to evenly dissipate the amount of heat throughout the device.

iPod Touch第4代前面板通过粘合剂连接在后壳上。 强烈建议使用热风枪软化粘合剂。

当热风枪温度调节在“低”位置时,开始加热触摸屏下部靠近主home键的位置。

建议以绕圈圈的方法加热所需的部分,以均匀地散发整个装置的热量。

在开源创作共享许可协议下,你的投稿已被许可