跳转到主内容
英语
中文

正翻译步骤 7

步骤 7
Lift board up slightly to reveal 2 ribbon flex and 1 wire connector still attached beneath board-remove flex before lifting board off completely.
  • Lift board up slightly to reveal 2 ribbon flex and 1 wire connector still attached beneath board-remove flex before lifting board off completely.

  • Remove bottom flex first.

  • Then use fingernails to gently pull out wire connector from lens.

  • And slide tabs on connectors from lens/shutter and lens screen horizontally away from board and then slide flex cables free.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可