跳转到主内容
英语
中文

正翻译步骤 6

步骤 6
Use fingernails or small flathead screw driver to push black tabs on view finder cable connector away from board connector.
  • Use fingernails or small flathead screw driver to push black tabs on view finder cable connector away from board connector.

  • Slide screwdriver beneath length of flex and gently lift upwards to remove flex from connector.

  • Lift flap on lens flex and gently slide flex out.

  • Use finger nails to gently prise small white connector from LCD (bottom right of board) free.

  • Be careful, do not pull it by wires.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可