跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的6本指南

英语
中文

正翻译步骤 1

步骤 1
Lay out a soft cloth on your workspace to prevent scratching the screen in this and future steps. Pry open the back casing using the soft plastic opening pick.
  • Lay out a soft cloth on your workspace to prevent scratching the screen in this and future steps.

  • Pry open the back casing using the soft plastic opening pick.

  • Be careful of the Power & Volume Key ribbon on the left side just next to the volume key. The ribbon is exposed and could be damaged with the opening tool.

  • Carefully pull the back casing apart from the rest of the phone with your hands. Because the casing is glued to the rest of the phone, this step may require some force. Don't be alarmed if the casing flexes a bit.

  • You may need an iOpener to loosen up the adhesive. Check out the iOpener 指南 for info on how to use it.

  • You can use a Small Suction Cup on the bottom corner to slightly lift up the back casing and help slipping the tool under the cover.

在你的工作区放一块软布,以防止在这个和以后的步骤中划伤屏幕。

用软塑料撬片打开后壳。

请注意音量键旁边左侧的“电源和音量键”功能区。 排线暴露在外,可能会被打开工具损坏。

小心地用手将后壳与电话的其余部分分开。 由于外壳粘在手机的其他部分,这一步可能需要一些力量。 如果外壳弯曲一点,不要惊慌。

你可能需要一个iOpener来松开粘合剂。 查看iOpener说明了解如何使用它。

您可以使用小吸盘吸住底部边角轻轻提起后壳,并帮助取下后盖的工具。

在开源创作共享许可协议下,你的投稿已被许可