跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的13指南

英语
中文

正翻译步骤 4

步骤 4
Use spudger to lift the LCD connector up off its socket on the logic board. Do not pry against the large IC next to the connector, or you may break it. Gently pry from the side of the connector as shown.
  • Use spudger to lift the LCD connector up off its socket on the logic board.

  • Do not pry against the large IC next to the connector, or you may break it. Gently pry from the side of the connector as shown.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可