How to Install the Zenmuse H3-2D Gimbal on a DJI Phantom

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。

英语

意大利语

正翻译步骤 2

步骤 2

Pass the G8 connector through the case

Insert the molex connector through one of the landing gear holes and case bottom shell.
Pull the cable through.
This is a really tight fit, take your time and avoid damaging the molex connector or cable. We found that gently rocking the molex connector back and forth through the hole eventually wiggled it through.