跳转到主内容
英语
中文

正翻译步骤 2

步骤 2
没有图片
Troubleshooting
  • Plug in the charging cable. If you get the charging symbols but cannot turn on the phone, ensure that the side buttons are connected. Peel up the rubber cover plug and push the connector into the receptacle.

  • If wireless charging is not working, ensure you're trying it with a phone that is fully booted and operational.

  • If wireless charging is still not working, take it all apart again and carefully transfer the location of the four pins on the phone side to the charging coil connector on the other side.

  • If the two sides are difficult to close and screw back together, bend the battery so that it is more or less curved - matching the previous battery. There shouldn't be any force necessary to keep the halves closed together.

  • If the glue on the back cover is weak, try warming the adhesive with a hair dryer before reinstalling. You can purchase replacement covers (with new adhesive) that are rather inexpensive.

插上充电线。如果你收到充电符号但无法打开手机,请确保已连接侧面按钮。剥开橡胶盖插头,将连接器推入插座。

如果无线充电无效,请确保使用完全启动且可操作的手机进行无线充电。

如果无线充电仍然无法工作,请再次将其全部拆开,并小心地将手机侧的四个引脚位置转移到另一侧的充电线圈连接器上。

如果两侧难以合上并拧紧在一起,请弯曲电池使其大致弯曲 - 与之前的电池相匹配。不应该有任何必要的力量来保持两半闭合在一起。

如果后盖上的胶水很弱,请尝试用吹风机加热粘合剂,然后重新安装。您可以购买相当便宜的替换盖(使用新的粘合剂)。

在开源创作共享许可协议下,你的投稿已被许可