跳转到主内容
英语
中文

正翻译步骤 1

步骤 1
On the bottom front corners of the cartridge you should see two screws using the 3.8mm "Gamebit" screwdriver bit. A 3.0U Spanner bit can also get them out. Once the screws are out, slide the front part of the plastic casing down to clear the tabs on the top of the case.
  • On the bottom front corners of the cartridge you should see two screws using the 3.8mm "Gamebit" screwdriver bit. A 3.0U Spanner bit can also get them out.

  • Once the screws are out, slide the front part of the plastic casing down to clear the tabs on the top of the case.

  • The two halves of the case should open easily.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可