跳转到主内容
英语
中文

正翻译步骤 3

步骤 3
The only thing holding in the board is the plastic shield on the bottom of the cartridge.  No screws are holding it in and is easily removed. Now you can fully take out the cartridge board from the casing. Here you can fully clean the pin set and inspect for damage to the circuit board.
  • The only thing holding in the board is the plastic shield on the bottom of the cartridge. No screws are holding it in and is easily removed.

  • Now you can fully take out the cartridge board from the casing.

  • Here you can fully clean the pin set and inspect for damage to the circuit board.

  • NOTE: The top edges of the board are made asymmetrically so it can only go into the casing one way. Near the Blue Circles

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可