翻译步骤＃2 - MacBook Pro 15" Unibody Late 2008 and Early 2009 Front Display Glass Replacement - iFixit

修复你的物品

维修的权力

商店

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的9本指南。

英语

中文

上一步下一步

正翻译步骤 2

步骤 2

With the panel sufficiently heated, fasten a heavy-duty suction cup near the upper right corner of the display glass.

Don't fasten the suction cup on top of the rubber strip around the edge of the display glass.

To attach the suction cups we sell, first position the suction cup with the movable handle parallel to the face of the glass panel. While lightly holding the suction cup against the glass, raise the movable handle until it is parallel with the other handle.

With the panel sufficiently heated, fasten a heavy-duty suction cup near the upper right corner of the display glass.
Don't fasten the suction cup on top of the rubber strip around the edge of the display glass.
To attach the suction cups we sell, first position the suction cup with the movable handle parallel to the face of the glass panel. While lightly holding the suction cup against the glass, raise the movable handle until it is parallel with the other handle.
Slowly and gently pull the corner of the display glass up off the display assembly.
If only the top edge of the glass lifts up (as seen in the third picture), repeat steps one and two until you can lift up the corner of the panel.

在开源创作共享许可协议下，你的投稿已被许可。