翻译步骤＃7 - Nintendo DSi XL Front Bezel Assembly Replacement - iFixit

修复你的物品

维修的权力

商店

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的4本指南。

英语

中文

上一步下一步

正翻译步骤 7

步骤 7

In the following steps, you will be using a spudger to remove the hinge pin from the left side of the DSi XL.

Place the tip of a spudger in the LED diffuser compartment, on the face of the clutch hinge.

Push the clutch hinge to the left.

In the following steps, you will be using a spudger to remove the hinge pin from the left side of the DSi XL.
Place the tip of a spudger in the LED diffuser compartment, on the face of the clutch hinge.
Push the clutch hinge to the left.
Some force will be required. You will hear an audible "pop" when the clutch has cleared the lower case. It will move about 0.25".

在开源创作共享许可协议下，你的投稿已被许可。