翻译步骤＃2 - Nintendo DSi XL Front Bezel Assembly Replacement - iFixit

修复你的物品

维修的权力

商店

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的4指南。

英语

中文

上一步下一步

正翻译步骤 2

步骤 2

Using the flat end of a spudger, pry the left speaker out of its socket on the front bezel.

De-route the speaker cable along the top edge of the screen.

Work carefully and slowly, holding onto the wire and not the speaker itself. The solder joints may break if pulled on too hard.

Using the flat end of a spudger, pry the left speaker out of its socket on the front bezel.
De-route the speaker cable along the top edge of the screen.
Work carefully and slowly, holding onto the wire and not the speaker itself. The solder joints may break if pulled on too hard.
In the same manner described above, remove the right speaker from its socket on the front bezel.
Place both speakers on the back of the upper LCD.

在开源创作共享许可协议下，你的投稿已被许可。