跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的20指南

英语
意大利语

正翻译步骤 5

步骤 5
Use the tip of a spudger to lift the LCD connector up off its socket on the logic board. Do not pry against the large IC next to the connector, or you may break it. Gently pry from the side of the connector as shown.
  • Use the tip of a spudger to lift the LCD connector up off its socket on the logic board.

  • Do not pry against the large IC next to the connector, or you may break it. Gently pry from the side of the connector as shown.

Usa la punta di uno spudger per sollevare il connettore del pannello LCD dalla sua presa sulla scheda madre.

Non fare leva contro il grosso chip accanto al connettore o potresti romperlo. Fai leva delicatamente sul lato del connettore come mostrato nelle immagini.

在开源创作共享许可协议下,你的投稿已被许可