iPad Mini 3 Wi-Fi 液晶显示板更换

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的48本指南。

英语

中文

正翻译步骤 20

步骤 20

Slide the lower left pick to the lower left corner to cut the adhesive on that corner.
Leave the pick at the corner. Do not pry any farther, and do not remove the pick from the iPad.
There are quite a few things to avoid beneath the lower bezel, so study the third image closely:
Antennas
Home button cavity
Digitizer cable
The following steps will direct you where to pry to avoid damage to these components. Only apply heat and pry where directed.

滑动左下边的撬片来分边角处的离粘合剂。
滑动到左下角时停止滑动。 然后放置在此。
在下面板下面有很多东西需要规避，请仔细研究第三张图像：
天线
Home键
排线
接下来的步骤将会指导您如何避免伤害这些部件。 只加热和撬动指南所指示的部位。