跳转到主内容
英语
中文

正翻译步骤 15

步骤 15
After removing a loop of copper tape around the digitizer connector, the display assembly can finally be separated from the logic board. A copper shield fastened to the back of the battery can also be removed at this point.
  • After removing a loop of copper tape around the digitizer connector, the display assembly can finally be separated from the logic board.

  • A copper shield fastened to the back of the battery can also be removed at this point.

  • Presumably, the rear case is thin enough to warrant a copper shield for either heat dispersion or EMI protection, or both.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可